SAP Transportation Management (SAP TM) Interview Questions & Answers

  1. Question 1. What Is Sap Transportation Management?

    Answer :

    SAP TM is a best-in-class Transportation Management System designed to manage all aspects of transportation processes within your company, including transportation planning and optimization, freight tendering and charge management.  SAP TM covers the full range of modes of transport (air, ocean, rail and road) and is designed for both Shippers and Logistics Service Providers.

     

  2. Question 2. Is Sap Transportation Management A Module Within Sap Erp Or A Stand-alone System?

    Answer :

    SAP Transportation Management is a stand-alone system.  Typically, it is installed on a new set of servers for development, QA and production environments, separate from SAP ERP.  SAP TM is tightly integrated with SAP ERP SD, MM, WM and FICO modules.

    During the 2016 Sapphire/ASUG conference, SAP has announced a roadmap to unify a number of SCM-based applications, including SAP TM, and roll them into S4 HANA.  This confirms SAP’s long-term commitment to developing and enhancing SAP Transportation Management as one of it’s key product offerings.

  3. SAP WM Interview Questions

  4. Question 3. What Are The Sap Erp Release, Enhancement Pack And Support Pack Requirements For Integrating With Sap Tm?

    Answer :

    Refer to SAP note 1738013 for a complete matrix of SAP TM and SAP ERP integration requirements.  As a general guideline, SAP ERP 6 with enhancement pack 7 or greater is necessary for latest full featured integration with SAP TM.

  5. Question 4. Does Sap Transportation Management Require The Installation Of Sap Erp?

    Answer :

    Although the great majority of SAP TM installations are done with SAP ERP being in place, it is technically possible to utilize SAP TM in a non-SAP ERP environment.

  6. SAP WM Tutorial

  7. Question 5. What Is The Latest Release Of Sap Transportation Management?

    Answer :

    As of the writing of this post, SAP Transportation Management 9.3 is the latest release in general availability.  SAP TM 9.4 is currently in ramp-up.  SAP TM has gone through 6 major releases – 8.0, 8.1, 9.0, 9.1, 9.2 and 9.3.

  8. SAP SD Interview Questions

  9. Question 6. What Sap Systems Have Integration Capabilities With Sap Transportation Management?

    Answer :

    The following SAP systems integrate with SAP TM out-of-the-box:

    • SAP ERP / ECC
    • SAP Customer Relationship Management (CRM)
    • SAP Extended Warehouse Management (EWM)
    • SAP Event Management (EM)
    • SAP Process Integration / Process Orchestration (PI / PO)
  10. Question 7. How Is Sap Transportation Management Different From The Sap Erp Logistics Execution Transportation Solution (le-tra)?

    Answer :

    In general, SAP Transportation Management contains all of the functionality of SAP ERP LE-TRA plus many additional features, such as comprehensive transportation zone and lane management, freight tendering, collaboration portal, transportation and route optimization, and much more.  SAP TM is truly a best-in-class Transportation Management System offering specialized functionality for all major modes of transport built on top of very flexible and extendable technical platform.

  11. SAP SD Tutorial
    SAP PM Interview Questions

  12. Question 8. Is Sap Process Integration (pi) Necessary For Sap Transportation Management Implementation?

    Answer :

    Do you already use SAP Process Integration (or Process Orchestration) in your SAP landscape? If so, it is a good idea to use SAP PI for integration between SAP ERP and SAP TM as well.  If not, then most of integration between SAP TM and SAP ERP can be accomplished via point-to-point web services (WSRM), basically connecting the two systems directly, avoiding the use of SAP PI.  The one major exception to this rule is the integration of SAP TM freight orders with shipment documents in SAP ERP, which currently can only be accomplished through SAP PI.  You might need such shipment integration if you utilize SAP ERP Warehouse Management and rely on shipment documents to perform some of the warehousing processes, such as loading.

  13. Question 9. Does Sap Transportation Management Come Bundled With Geographical Information Systems (gis) Capabilities?

    Answer :

    SAP TM does not have extensive GIS capabilities built in.  Typically, SAP TM is integrated with 3rd party GIS solutions for geo-coding, geo-routing (distance and duration determination) and visual map display.  SAP TM supports integration with all major GIS providers, including ALK’s PC Miler, Rand McNally and HERE (formerly known as NAVTEQ).  Most GIS solutions do require additional software licensing for productive use, but it is typically a fairly small amount compared to the SAP TM software licensing fees.

  14. SAP MM Interview Questions

  15. Question 10. Does Sap Transportation Management Require The Use Of Sap Event Management?

    Answer :

    No.  SAP Event Management (EM) can optionally be used in tandem with SAP Transportation Management to capture and expose detailed information around expected and actual events (for example, planned vs. actual arrival time at a stop).  Plenty of SAP TM implementations are done without the use of SAP EM.

  16. SAP PM Tutorial

  17. Question 11. Does Sap Transportation Management Have Load Planning Capabilities?

    Answer :

    Yes.  Comprehensive load planning was introduced in release 9.1 of SAP Transportation Management. Here is a great article with sample screenshots describing SAP TM load planning capabilities.

  18. SAP ABAP Interview Questions

  19. Question 12. Is There A Way To Provide External Carriers With Access To Sap Transportation Management Information And Transactions?

    Answer :

    Certainly.  One of the great new features of SAP Transportation Management 9.1 is Collaboration Portal, which allows external partners (such as carriers) to access relevant SAP TM data and transactions via an externally facing web portal.  Here is a great document with sample screenshots describing the Collaboration Portal functionality.

  20. SAP WM Interview Questions

  21. Question 13. What Kind Of Reporting And Analytics Capabilities Does Sap Transportation Management Have?

    Answer :

    SAP TM relies on SAP BI platform to deliver reporting and analytics.  As with many other SAP products, SAP customers have access to standard SAP Business Warehouse content for SAP TM that provides out-of-the-box extractors, data providers and queries.  This standard content is often enhanced as part of the SAP TM implementation project in order to fulfill each customer’s unique reporting requirements.

  22. SAP MM Tutorial

  23. Question 14. Does Sap Transportation Management Support Optimized Routing And Last Mile Planning?

    Answer :

    Absolutely!  This scenario often comes up in truck-based private fleet implementations, especially the ones that have to deal with multi-stop scenarios.  SAP TM comes bundled with a powerful route optimizer solution that utilizes a large number of configurable soft and hard constraints.  The use of the optimizer enables automated building of cost-effective freight orders (aka shipments/loads), taking into consideration such parameters as accurate transit distance and duration, plant/customer/vendor operating hours, loading and unloading durations, duty and drive time scheduling constraints, as well as many others.  Optimizer can be used in a fully automated manner, where freight orders are created periodically via a background job, or in an interactive manner where a transportation planner is presented with a proposed optimized solution and can then make adjustments to freight orders prior to saving.

  24. Question 15. Does Sap Tm Support Transportation Planning Of Power Units (aka Tractors), Trailers And Drivers For Private Fleet?

    Answer :

    Yes.  SAP Transportation Management has supported detailed planning of trailers since 9.0 release via the use of optional Trailer Unit documents.  Trailer Units enable the modeling of complex trailer scenarios such as drop-and-hook and trailer swap, but they do introduce an additional document into the transportation planning process, so careful consideration has to be given to whether the additional transactional complexity is justified by the enhanced planning capabilities. When introduced, the Trailer Unit document becomes responsible for tracking the movement of the trailer, whereas the Freight Order document is responsible for tracking the movement of the power unit and driver(s).

    As of release 9.3 support pack 3 SAP TM supports the planning and assignment of driver(s) to freight orders. 

  25. SAP Security Interview Questions

  26. Question 16. What Is A Typical Duration And Cost Of An Sap Transportation Management Implementation?

    Answer :

    An average SAP TM implementation takes 6-12 months to complete and will cost between $800,000 and $1,500,000 in consulting fees.  SAP software licensing is also required .  These are just general guidelines.  Actual costs vary greatly based on the scope and size of each project.

  27. SAP ABAP Tutorial

  28. Question 17. How Is Sap Transportation Management Licensed By Sap?

    Answer :

    SAP Transportation Management does require additional licensing to be purchased.  It is currently based on the overall transportation spend in dollars to be managed through the SAP TM solution.  Contact your SAP account executive or Value Add Reseller (VAR) for further details.

  29. SAP APO Interview Questions

  30. Question 18. What Are The Common Transport Errors In Sap ?

    Answer :

    Below are the common errors in SAP transport management

    Return code 4 : Imported with warnings 

    Generation of program, columns or row missing .

    Return code 8 : Imported with errors 

    • Syntax error
    • Program generation error
    • Dictionary activation error or method execution error 

    Return code 12 : Indicates Import Cancelled 

    • Program cancelled due to job
    • Import cancelled due to object missing
    • Import cancelled due to object not active 

    Return code 18 : Indicates Import Cancelled

    • Due to system down while import
    • Due to user expired during import
    • Due to insufficient roles or authorization
  31. SAP SD Interview Questions

  32. Question 19. How To Transport Change Request From One Client To Another Client In Sap ?

    Answer :

    You can transport change request from one client to another client using transaction code SCC1.

  33. SAP Security Tutorial

  34. Question 20. How To Disable The “import All” Button On Stms For The Queues In Sap?

    Answer :

    Login to your Transport Domain Controller. Run STMS->Overview->System.Choose the System you want to disableimport all. Go to Transport Tool tab.Add/Create Parameter “NO_IMPORT_ALL”set its value to 1.

  35. SAP for Retail with SAP ERP 6.0 Interview Questions

  36. Question 21. How Can You Tell If A Transport Entry Is In The Process Of Being Imported In Sap ?

    Answer :

    Added on June 11th 2015 by 
    Use table TRBAT to check if the transport is in progress.

  37. Question 22. What Is A Sap Transport Group?

    Answer :

    SAP systems that share a common transport directory tree form a transport group.

  38. SAP APO Tutorial

  39. Question 23. What Is Sap Transport Domain Controller?

    Answer :

    R/3 system with the reference configuration is called as the transaction domain controller.

  40. SAP GTS Interview Questions

  41. Question 24. What Is Sap Transport Domain?

    Answer :

    All R/3 systems that are planned to manage centrally using TMS form a transport domain.

  42. SAP PM Interview Questions

  43. Question 25. What Are The Two Editor Modes In Which We Can Configure The Sap Transport Routes?

    Answer :

    1. Graphical Editor
    2. Hierarchical Editor

  44. SAP GRC Tutorial

  45. Question 26. What Are The Various Configuration Methods Available In Stms?

    Answer :

    1. Single system configuration
    2. Development and Production systems
    3. Three systems in a group.

  46. SAP GRC Interview Questions

  47. Question 27. What Is A Standard Transport Layer In Sap ?

    Answer :

    This describes the transport route that the data from the development systems follows.

  48. SAP MM Interview Questions

  49. Question 28. What Is Sap Transport Layer?

    Answer :

    It is a predefined transport layer for DEV classes of SAP standard objects.

  50. SAP SCM Tutorial

  51. Question 29. What Are The Three Approval Steps You Need To Follow As A Part Of Approval Procedure In Qas?

    Answer :

    1. To be approved by system administrator
    2. To be approved by department
    3. To be approved by request owner

  52. SAP SCM Interview Questions

  53. Question 30. What Are The Various Qualifier Option Or What Are The Various Import Options?

    Answer :

    There are six import options
    1. Leave transport request in queue for later import
    2. Import transport request again
    3. Overwrite originals
    4. Overwrite objects in unconfirmed repairs
    5. Ignore unpermitted transport type
    6. Ignore predecessor relations